May 12, 2022 / Wade Griffin

Amped WiFi Extender Not Connecting to Internet. Let’s Fix it!

Are you facing Amped WiFi extender not connecting to internet issue? If yes, then don’t fret. Hundreds of Amped extender users face a similar kind of issue. So, here we are providing you with the permanent solutions to the Amped WiFi extender not connecting to internet issue. Just scroll down to gain knowledge.

Fixed: WiFi Extender Not Connecting to Internet

Perform a Restart

Users, at times, get hard times performing internet-related tasks due to Amped WiFi extender not connecting to internet issue. There can be many reasons behind the outcome of this specific issue. Mostly, minor technical glitches are the root cause and that can be fixed by simply rebooting your Amped extender.

To reboot:

  • You are first required to disconnect all the WiFi-enabled devices from your Amped WiFi extender.
  • Then, turn it off and unplug it from the power socket.
  • Wait for a while before connecting it back to the power socket and powering it on.
  • Now, re-connect your WiFi-enabled devices.

See whether the WiFi extender not connecting to internet issue has been resolved. If not, then head to the next troubleshooting method given below.

Check the Power Supply

You need to make sure that the electrical socket to which your Amped WiFi extender is plugged in doesn’t have any sign of damage. If you identify any damage or short-circuit, then consider plugging your Amped WiFi extender into another socket to avoid a power outage that might lead you to face WiFi extender not connecting to internet issue. Apart from it, don’t forget to examine the condition of the power cable as it needs to be damage-free for proper functioning.

Verify Your Internet Connection

If your networking devices are connected via a wired medium, then any wear or tear to the Ethernet cable can get you into trouble resulting in the WiFi extender not connecting to internet issue. Therefore, replace or swap the cable with the new one if you find any damage to it. While using a wireless connection, make sure that your Amped WiFi extender is placed within the range of your host router to avoid connection loss issues.

Avoid WiFi Interference

Avoid placing your Amped WiFi extender close to the objects causing WiFi interference such as refrigerators, microwaves, baby monitors, cordless phones, and other smart home appliances. As these objects use radio signals for transmission, they can disrupt the WiFi signals of your router as well as extender. So, avoid placing such things close to your devices else you’ll keep on facing Amped WiFi extender not connecting to internet issue.

Reset Your Amped Extender

If none of the above methods proved beneficial for you in fixing Amped WiFi extender not connecting to internet issue, then you are required to reset your Amped extender to the default factory settings and re-configure it again from the scratch. Although, resetting an extender is a simple task still many netizens face difficulties in doing so. If you also having the same fate and experiencing issues then walk through the below-mentioned steps to reset your Amped WiFi extender without any stress. The best thing is whether you own the Amped Wireless high power wireless-n 600mw or any similar kind of model, the process of resetting is the same.

To Reset:

  • Look for the Reset button on your Amped extender.
  • Once you have located the button, press it.
  • Then, your Amped extender will restart on its own and will be restored to the default factory settings.
  • Now, re-configure it using the default URL.

In this way, you can reset your Amped extender to the default factory settings without any stress. If you face any issue while resetting, then feel free to get in touch with our experts for instant support.

Things to Do to Avoid an Issue

Upgrade Amped Extender Firmware

Have you heard the popular saying- “Prevention is better that cure”. It means it’s better to avoid the problem rather than getting it fixed. So, always prefer to use an upgraded version of Amped extender firmware to avoid Amped extender not connecting to internet issue. Therefore, here we are providing you with complete information to update your Amped extender firmware with ease.

  • Power on your PC and access an updated version of the internet browser.
  • Then, download the latest version of Amped extender firmware and unzip it if required.
  • Access the Amped WiFi extender page and click Choose File option to locate the file.
  • Thereafter, select the upload button to initiate the Amped firmware extender update process.
  • Now, just follow the on-screen instructions to complete the Amped firmware extender update process.

In this way, you can easily upgrade the firmware of the Amped WiFi extender to the latest version and avoid getting stuck with an issue.

Hopefully, the aforementioned steps will prove helpful in resolving Amped WiFi extender not connecting to internet issue. If you aren’t able to fix the issue after implementing the above troubleshooting methods, then consider taking the support of our IT professionals as they are available 24/7 to help you fix Amped-related issues.

Disclaimer: We at ampedlogin.com provide online support and information for issues with amped wireless extender WiFi devices. However, we are not involved with any particular organization or brand. The use of trademarks, brand names or logos used on the site should be considered only as for reference purpose. We provide run-time assistance to customers who directly approach us.