Router Login IP

The default IP address for setting up different routers is You may quickly access the graphical user interface of your router by typing the IP address into the address area of your browser. Amped wireless routers are primarily used with the IP address. Therefore, you must reach the IP address to configure your router or update the settings of your device. However, only a small number of individuals can successfully reach the IP address. If you are also one of those who are not able to make the most of your device due to router IP issues, your problems will be resolved on this page. Here we are going to give the instructions for logging into your router’s login page using the IP and tips on fixing related issues.

How Do I Login to My Router Through

To get into the router using the IP address, follow the steps listed below:

  • Once you’ve finished unpacking your router, use an Ethernet cable to connect it to your modem.
  • Check the cable you’re using to link the devices once more. It must not be damaged in any way.
    Quick Tip: It is advised to connect your device with an Ethernet wire if you don’t want to run into any problems while connecting to your router using the IP address. The possibility of being abruptly disconnected when logging in may rise when using wireless connections.
  • Install your router’s power cord into a wall outlet and turn the power switch on.
  • Your device’s LED lights will shortly begin to glow.
  • Next, launch a web browser on your computer and enter the IP address into the URL area.
  • To reach the login page, press the Enter key.
  • Verify that the IP address is entered correctly if the IP address does not take you to the router’s login page.
  • To access the Amped wireless setup page, log in using the default username and password on the login page.

The IP address can be used to access your router in an aforementioned manner.

Fix: Doesn’t Work

Many users encounter the not working problem, which prevents them from accessing their routers. If you are experiencing the same thing, you are acting inappropriately. Simply keep an eye on the troubleshooting advice provided below and take action to fix the not working issue.

1. Restart the router

The router IP not working issue might also be brought on by a malfunction in the way your router operates. Rebooting your router is advised to have it resolved. To do this, disconnect the router’s power cord from its socket and then plug it back in. This can assist you in fixing the problem on your own.

2. Make sure the IP is entered correctly

Despite the meaninglessness of it, many people frequently input “192.168” or “188.253” instead of the right IP address, and then fail to determine whether that is the issue. Before trying your hand on the next fix in the line, make sure that the current one isn’t the cause of the problem you are facing.

3. Update the Web Browser router IP may create an issue if accessed through an outdated web browser. Thus, before accessing the default router IP, make sure to update your web browser to the latest software version. If you want to ditch your current browser, then you can also opt for the same. FYI, router IP supports working on various internet browsers, including Chrome, Safari, Edge, and Firefox.

4. Remove Cache and Cookies

Accumulation of cache and cookies on your browser can also be the reason why the default router login IP is not working for you. Thus, it is suggested that you free your web browser of cache and cookies by accessing the settings of your browser.

5. Relocate the Router

It has been found that users can also find issues while accessing the IP address if the router is located in the wrong place. Ideally, your router should be located in a well-ventilated area and somewhere in the center of your home.

6. Check for WiFi Interference

Devices emitting radio waves if placed near your router can also drag you to the default router login IP not working issue. Hence, place your Amped wireless device away from devices like Bluetooth speakers, microwave ovens, cellular phones, etc.

7. Cross-check Cable Connections default router login IP won’t work for you if the cable connecting your router and modem is damaged. Hence, look for cable connections and ensure that everything is on track. If you find the cable is torn off from any point, replace it with a different one to get the issue resolved.

This is all about how to fix the not working issue. If none of the tips are bringing your results, then the only way out is to restore your WiFi router to the factory settings and then configure the device again.

You can also approach our team of experts for quick assistance in fixing router IP issues if unable to make things happen on your own.

Disclaimer: We at ampedlogin.com provide online support and information for issues with amped wireless extender WiFi devices. However, we are not involved with any particular organization or brand. The use of trademarks, brand names or logos used on the site should be considered only as for reference purpose. We provide run-time assistance to customers who directly approach us.